Icu Electric Bed

Approx. Rs 10,002 / PieceGet Latest Price

WEIGHING SYSTEM CONSISTING OF:

- NO. 4 SENSORS, RATED CAPACITY OF EACH SENSOR 100 KG (THEY ENSURE THE EXACT WEIGHT IN ANY POSITION THE BED PLATFORM TAKES);

- STATIC SAFETY LOAD OF EACH SENSOR 50 % OF RATED CAPACITY;
- INTERCHANGEABLE;
- ELECTRONIC WEIGHT VISUALIZER mod. TE 1000 D, having the following functions:

* Manual subtractive tare;
* Alarm thresholds setting (SOUND and VISUAL) for weight decrease/increase;
* KEY - TARE / TARE RESET KEY which allows to cancel the weight of any items the patient needs. * (pillows, blankets, etc.) during the weighing cycle, without compromising the weight/patient; * Display difference between actual weight and initial weight;
* 6-digit, 7-segment display in RED color (height 2 cm), READABLE EVEN AT A DISTANCE;
* ANTI BLACKOUT BATTERY that allows autonomy and perfect functionality of the scale bed even in the absence of electricity
(autonomy 5 hours);
-INTERFACE for connection to P.C. (weighing system made for the computerization of Dialysis Centers), via serial output
RS232.

FUNCTIONS AND FEATURES:

NET TOP SUITABLE FOR CARDIAC MASSAGE Three-section articulated net, with adjustable back and pelvis by electric actuators (low voltage24 V DC, maximum reliability, sturdy and quiet) and friction leg that allows the position of TRENDELEMBURG.

The electric actuators have a dynamic thrust of 3000 N and a static load capacity of four times the dynamic load.
* Electrically adjustable backrest via hand control from 0° to 75°;

* BACHT with electric adjustment via hand control from 0° to 25°;
* Footrest/legrest infinitely adjustable from 0° to 25° via friction mechanism (This mechanism allows micrometric adjustment of leg tilt).
* Footboard lowering lever located on both sides of the bed.
* Control for simultaneous movements (possibility through a button located on the hand control to operate all the movements of the bed base at the same time).
The fully REMOVABLE BED FLOOR, made of steel rod.
WITH ANTIMICROBIAL TREATMENT of mm. 5 and mm. 8 and supported on the frame by nylon supports (mounted on steel pins) are
EASILY REMOVABLE TO ALLOW MAXIMUM CLEANING OF THE BED.
FAST VERTICAL EXTRACTION bed shoulders, with stainless steel tube core and plastic cover, 8 mm thick laminated plastic laminate center panels.
The bed platform is complete with two mattress retainers (foot side and head side)
made of 8 mm diameter steel rod.
ALL EDGES AND PROTRUDING AREAS OF THE FRAME ARE ROUNDED.
* NET FLOOR DIMENSIONS: cm 199 x 88 x 57 h
* TOTAL DIMENSIONS WITH BED RAIL: cm 218 x 95 x 57 h / h 96 (measurement that also includes the height of the headboard)
* RECOMMENDED MATTRESS DIMENSIONS: cm 195 x 85
* TOTAL WEIGHT: 95 kg
* counter-trendelemburg inclination: 12° with 4 positions
* backrest inclination : 0° - 71°
* femoral inclination : 0° - 16°
* total weight: 150 kg.
* liftable load: 320 kg